Miter Saw vs Table Saw; Which one is Good for Your Projects?

There are many kinds of carpentry tools for your DIY projects. Read on to find a thorough explanation about a miter saw vs table saw below and why you need them.

What is a Miter Saw?

A miter saw is a machine tool that features a rotatable circular blade fixed on a swing arm. People use it to make a specific cutting such as a trim board and siding plank.

The main benefit of a miter saw is it can be used to make accurate crosscuts and angular cuts, which cannot be done easily with a table saw.

This miter saw features a movable head where you can find a handle that enables you to bring it down on to the work-piece to cut.

The handle can be set into different angles, allowing you to get a precise cut while taking control of it.

But the drawback of a miter saw is it cannot make any cut that is wider than the blade.

Note that the blade of a miter saw usually comes in 8″x10″x12″. If you want to cut a larger material, you are going to need a wider blade, which can be a bit hard to find.

What is a Table Saw?

As the name suggests, this saw features a flat table with a built-in circular rotatable blade protruding out through a slit that is ready to cut anything in front of it.

The table is used to support the wood when it is being cut. The blade will spin fast as you push the wood to it. Since this saw has a flat table, you will find it easier to cut larger pieces on it.

You will not have to be shaking which ends up cutting the wood unsteadily.

Table saws are commonly used in woodworking workshops because they can make various kinds of cutting and cut a wide array of wood pieces despite the size.


Talking about the versatility of miter saw vs table saw, you have to remember their usage. A miter saw can only be used to cut specific angles, which makes it a perfect tool for the trim carpentry industry.

While a table saw can do the same job as its counterpart can. However, the cut will not be less precise. Besides, you will have to break a sweat when feeding the trim into it.

If you are wondering which one is more portable between miter saw and table saw, the answer goes to the first one. A miter saw is lighter as it only features a spinning blade and a handle.

On the other hand, the counterpart features a table, which makes it stationary. Well, some table saws feature castors that allow you to move them.

But they are still pretty heavy so that it can’t be brought to your friend’s garage easily.

In the conclusion of miter saw vs table saw, the latter is more versatile than the other as it can cut any kind of wood and can be moved although it will be a challenging task

Miter Saw vs Table Saw Blade

miter saw vs table saw

Since you use miter and table saw for different purposes, it means the blades are not the same.

The name miter saw derives from the verb “miter” meaning to join two pieces to form a 90-degree angle like the one you see when two sides of a picture frame meet to become a corner.

You can swivel and tilt the head of a miter to cut any degree, making it a top-notch choice for those who want to install trim and crown molding.

Besides cutting angles, the significant difference between a miter saw vs table saw is in cutting bevels.

If you want to create a seamless transition by making a sloped edge rather than a flat one, a miter saw will be your safe choice. A table saw can also do this job.

However, it will be more difficult because you have to adjust the blade. Therefore, this kind of trick requires advanced carpentry skills.


In the term of accuracy, both miter saw and table saw can cut the wood pieces accurately. However, one of them can be more precise than the other. A table saw can cut various kinds of pieces well.

On the other hand, its counterpart that features a moving blade and handles makes a tricky cutting become a snap.


miter saw vs table saw

Besides the types of cut and their accuracy when buying miter saw vs table saw, considering how much you would splurge out on them is indispensable. Both of them cost about the same.

However, a table saw can be somewhat expensive comparing to the other. A miter saw set you back around $100 for a compact eight-inch model and $1,900 for a contractor-quality sliding type.

On the other hand, a table saw that features a stand cost around $200 up to $2,800 depending on the brand and where you purchase it.


If you are talking about safety when comparing miter saw and table saw, both of them possess potentially dangerous kickback as they have a spinning blade.

But you should know that more injuries occur when people using a table saw. There have been approximately 79,500 injuries caused by it.

Who Uses Them?

miter saw vs table saw

Miter saw vs table saw? Who probably uses them? Since a table saw is good at ripping plywood, cutting a wide board to build some pieces of furniture like cabinets and decks, it is suitable for a woodworker.

A miter saw is excellent at trimming crown and cap molding, door and mirror frames, and more. Therefore, it is suitable for a carpenter.

Miter Saw vs Table Saw; Which one should You Have?

You might be trying to compare miter saw vs table saw to decide which one you will purchase. The answer would depend on what kinds of projects you usually do and your skills.

If you are a beginner that does not do DIY projects quite often, consider buying a table saw first since it is quite versatile. You can make any kind of cut using it.

But if you are a DIY enthusiast and have it already, consider adding a miter saw in your garage.

Now you know the difference between a miter saw vs table saw. Both of them are handy. But which one you should buy depending on what you need and your budget.

Leave a Reply

Your email address will not be published.