Categories
More

How to Clean Silver Plate without Damaging Any Parts

Learn how to clean silver plate so that your fork, spoon, or even a tea set can always look new. Especially because these things are something you use daily so you will need to make them last longer. 

Over time, silver plates will eventually go tarnish, dull, and change color. This will surely happen but cleaning them regularly can at least prevent it from coming to fast.

Thus, you must clean them regularly rather than just when the stain comes. 

1. Regular Cleaning

silver plate

One of the easiest and simplest ways on how to clean silver plate is by cleaning it with soap every day. This applies to things that you use daily like forks, spoons, plates, or other cooking equipment. 

Before starting, check out the type of silver-plated that you are using. You can do this by pressing a bit of your fingertip on the surface.

If it leaves a mark then it is lacquered, on the other hand, if it stays clean then it is not. 

For the lacquered type, it is best to use warm water and for the other type, you should use hot water instead. This is important to notice because if you do it the other way around then it can strip up the silver slowly. 

The full up the sink and add some citric acid soap inside. Mix it well until everything is dissolved perfectly. Then sink in your silver plate for around 5 minutes so it can absorb all the chemicals. 

Pull it up and rub gently using a sponge to clean the plate. Then rinse it with pouring water until all the soap is gone. You do not need to wipe it up, however, just make sure, before putting it in or it is all-dry. 

2. How to Clean Silver Plate with Baking Soda

This next step is for a deep cleaning silver plate, which means you do not need to do it all times. You can do this once or twice each year, depending on how bad your silver plate is. 

The materials you will need for deep cleaning is a bowl, baking soda, aluminum foil, and hot or warm water. You can also use some gloves to prevent anything your hands from getting hurt. 

Next, wrap the inside part of the bowl with the foil. Then, place the silver plate inside and make sure that it sinks in. Parallel, boil around 4 cups of hot water in a pan. 

When the water is hot enough pour some baking soda inside. If it dissolves well, then bubbles should occur inside the pan.

Slowly pour the water inside the bowl where the plate is. You can put as much as you need or at least until it sinks everything in. Leave it for around 15 minutes so the baking soda can start working. 

At this process, you should see the tarnish disappear slowly, but this also depends on how bad it is. At least it should fade away a bit even though not all. 

The next step in how to clean silver plate is by taking it out and rubbing it gently with a sponge. Press a bit harder in areas that seem darker and hard to remove.

Then rinse it all with warm water and make sure there is no residue left. 

The next home remedy for cleaning silver plated items is vinegar. The steps are just the same as before, but to make it stronger, mix baking soda with vinegar. With this mixture, your forks, spoons, or other equipment can be cleaned right away. 

3. How to Clean Silver Plate with Toothpaste

Another mixture in the house that you can use to clean the silver plate is toothpaste. However, choose non-gel or non-abrasive ones so it is safe for your accessories and equipment. 

The steps on how to clean silver plate with toothpaste are by rubbing it in a circular motion. Leave it for around 5 minutes and rinse the entire residue off.

After this step, your things should be shining like new without tarnish. Try this treatment once a month to get the best result. 

4. How to Clean Silver Plated Jewelry

As for silver plated jewelry, the steps are also the same as other equipment. However, especially for accessories, it is best to clean them every time you use them.

The first step on how to clean silver plated jewelry is by mixing hot water, baking soda, and a pinch of salt. Mix them all until it becomes a mixture and has a sticky texture.

Then slowly rub the mixture onto your jewelry and get rid of all the dirt on it. Once you are done, rinse it with water and wipe it using a dry cloth. 

5. Polishing Silver Plate

silver plate

After they are clean, it is time to polish the plates to make it shining and glowing. For this step, you will need silver polish, dry cloth, and water for the process. 

Just like polishing shoes, all you need to do is rub the chemical on the surface of your plate in a circular motion. Let it stay for 2–3 minutes so the elements can work and make it shine. 

Then, rinse the item with warm water and make sure to wash away all excess polish. 

Dry it and wipe off all the waters so there is none left. You can also use a hairdryer; this way is faster and decreases the risks of causing marks on the plates. 

When it is dry, store your plate in a storage bag that is dry and not moisturized. On the other hand, you can also put it in a kitchen drawer that has tarnish fabric lining.

This way, your equipment will be safe and keep shining until you use it again. 

Well, overall the steps on how to clean silver plate are not difficult. You do not need to buy the chemicals because you can make one on your own.

To get the best result, it is best to do these treatments at least once a month. 

Leave a Reply

Your email address will not be published. Required fields are marked *